Sacar Enchufe De Punto De Luz

Written by Gerardo Molina
Updated at: 28 March 2026

Sacar enchufe de punto de luz, or "wiring a plug to a light fixture," is a common DIY electrical task. It allows you to power devices requiring a standard plug from an existing light fitting, usually a ceiling rose. This is useful when you need an outlet where one doesn't exist, like adding a lamp to a room without wall sockets. However, it's crucial to understand that this method draws power from the lighting circuit, so you need to ensure the circuit can handle the additional load and that your wiring is safe and compliant with local electrical regulations. Improper wiring can lead to overloads, fire hazards, or electric shock.

Step-by-Step Guide

Here's a simplified guide to wiring a plug to a light point. Always disconnect the power at the circuit breaker before starting any electrical work.

Step 1: Preparation. Obtain a suitable length of electrical cable (usually two-core for simple connections, three-core for grounding if available) and a standard plug. Ensure the cable is appropriate for the current draw of the device you intend to plug in.
Step 2: Access the Light Fitting. Carefully remove the light fitting cover and identify the live (usually brown or red), neutral (usually blue or black), and earth (green and yellow) wires. Take a photo before disconnecting anything!
Step 3: Wiring the Plug. Connect the wires from your new cable to the corresponding terminals on the plug: live to live (L), neutral to neutral (N), and earth to earth (E, if present). Ensure the connections are tight and secure.
Step 4: Connecting at the Light Point. Connect the other end of your new cable to the light fitting terminals. Carefully follow the wire colors and connect live to live, neutral to neutral, and earth to earth (if available on both the light fitting and your cable).
Step 5: Securing the Wiring. Use appropriate connectors (like terminal blocks) to join the wires securely and insulate them properly. Ensure the wires are neatly arranged and don't strain the terminals.
Step 6: Reassemble and Test. Carefully replace the light fitting cover. Turn the power back on at the circuit breaker. Test the plug by plugging in a device. Also, ensure the light still functions correctly.

Example: Imagine you want to power a small fan from your ceiling light. You connect a two-core cable to a standard plug and then connect the other end to the live and neutral terminals within the ceiling rose. If your ceiling rose has an earth terminal and your cable is three-core, connect the earth wire too.